Connector Visual Inspection Machine

Illustration :

It is suitable for defect detection and automatic screening of the surface of consumer electronics wiring harness connector, automatic feeding through the vibration disk, and then use CCD to identify the image of the product's multiple angles to be inspected, judge the workpiece qualified and unqualified and screen, this equipment has the characteristics of fast speed, high dynamic rate, good stability and so on.

Schematic Diagram

Basic Parameter

1. Voltage: 220V
2. Power: 1.4KVA
3. Air pressure: 0.5MPa
4. CT: 3.2s
5. Weight: 500kg
6. Dimensions: Length * width * height =2000*1200*1950 (mm)

Standard Configuration

Camera: Keith
Cylinder: SMC
Module: HIWIN
Sensor: Keyens
Vibratory disc: Ocles
PLC: Keynes

Optional Configuration

Product automatically installed suction tube.

Equipment Characteristics

Multi-specification product compatibility: through the track segment replacement and quick change, can be compatible with a variety of products;
Multiple portrait inspection surfaces: Multiple inspection surfaces of the product can be detected by three sets of cameras: sky, bottom and side;
Product classification collection: After the portrait inspection is completed, the workpiece OK and NG products are classified and collected.

Language